Venom

D.H.VENOM

We have sold over 70 kits to 16 countries.)

          For 91 Fan or Turbines from 12 lbs thrust .
Ideal for the smaller turbines. MW 54, Simjet 1000, Ram 500 etc.
1/6 scale. 84" span. (2.13M) Length 66".   Weight 8 to 10 kg.

                   Semi-kit contains:
Plans. Epoxy fuselage with carbon. Epoxy booms. Canopy. Inlet ducts.
Stainless steel rear duct. CNC cut rib set. CNC cut formers.
Moulded tip tanks, doors, wing fences, blisters.
Metal joiners for wings & booms.
£699 Post (ask)
                          Extras:
mechanical Retract units £95 set of 3. Retract servo £50
Electric retracts. set, £150
Mainleg oleos £35 pr. With scissor £50.
Semi scale noseleg. £45.00.
Main wheels £55. Nose wheel ; £21.
Main wheel brakes £72. Alternative Nosewheel brake £30.
Photopack (20) £7. Adhesive roundels .£12 set.

YOU WILL NEED the following balsa wood for the kit
8. - 1/4 x 1/4 hard. 2. - 3/16 x 3/16. 16. - 3/32 x 4"
6. - 1/16 x 4". 2. - 1/4 x 4"

Proskin can be used for wings and tail, 1 sheet required, ask for
the special rib set .

Richard Johsons striking Venom. Jet Munt VT80 motor

Maiden flight from Johnr. electric power.

Steve Brett at World Jet Masters 2005. Still flying in 2013.	Dario Columbo from Sardinia.
	John Vasil's Venom ready for test flight. PST 600R for power.

Ian Bailey's on first flight.
	Dismantling. The outer wing panels unplug. The booms unplug behind the wing. Size dismantled. - 43" long x 40" span.

Mark Handley after Maiden flight in formation
with a Javelin, "Very impressive".

Colin Straus is delighted with his Venom.
Advanced aerobatics and a gentle stall
at walking pace. 12 lbs thrust turbine.
Takes off in 70 metres with no wind.
Has flown from grass runway.
photos from RCME magazine

VENOM KIT The epoxy booms are below.

Main oleo legs

Dashboard kit 1/6 or 1/5 scale £10

New Air retracts in Pete Ford's EDF Venom

Noseleg £45
wheel £17. Brake £30

Main wheels.£50 pair.
110 mm x 24 mm. 140 gm each.
Brakes £ 72 Pair.

Waterslide . £2